Too much buffering?

Sometimes you may experience buffering due to low internet speed or high internet traffic. Cause:

The most common cause of buffering is the result of slow internet connection. This may be because of low internet speed or other users hogging the bandwidth in your house. Do you have lots of users in your home? Disconnect them all and try again.

The second and more logical reason is that you are using Wi-Fi, it doesn't matter how fast your internet is…Wi-Fi as whole is slow and unreliable. it just is…. You should avoid using it when possible. Resolution:

Directly connect to your router using an Ethernet cable or to a powerline adaptor.

If not possible, try moving the box closer to the router.

Change your WI-FI channel. To avoid interference with nearby devices.

If you experience buffering press "pause" for 10-15 seconds and resume, most of the time that will eliminate the need to buffer. How to fix IPTV Stalker buffering issues, really simple to do. Change your router's DNS to Cloud flare DNS servers: Primary: 1.1.1.1 Secondary: 1.0.0.1 This can also be done on none STB devices. More Info about Cloud flare DNS can be found here Setup on a Router Setting up 1.1.1.1 takes two minutes and requires no technical skill or special software. Even if you're a computer novice, pick your device below for an easy-to-follow setup guide. Your router's configuration may vary. Consult your manual for more information. 

   From your iPhone's home screen, open the Settings app.
Tap Wi-Fi, then tap your preferred network in the list.
Tap Configure DNS, then tap Manual.
If there are any existing entries, tap the - button, and Delete next to each one.
Tap the + Add Server button, then type 1.1.1.1
Tap the + Add Server button again, then type 1.0.0.1. This is for redundancy.
Tap the Save button on the top right.
You're all set! Your device now has faster, more private DNS servers Setup on Android Setting up 1.1.1.1 takes two minutes and requires no technical skill or special software. Even if you're a computer novice, pick your device below for an easy-to-follow setup guide. Note that Android requires a static IP to use custom DNS servers. This setup requires additional setup on your router, affecting your network's strategy for adding new devices to the network. We recommend configuring your router's DNS instead. This will give all devices on your network the full speed and privacy benefits of 1.1.1.1 DNS.  

  • 0 Users Found This Useful
Was this answer helpful?
Related Articles
    No Signal - Black Screen

    Check the connection from the STB to your television whether it is a HDMI lead or AV lead....

    Not Loading/Stuck on loading

    When you start to NowWatchTVLive the STB says “Loading” – if it gets stuck it means it cannot...

    Connecting wirelessly

    If you are using a Wi-Fi adaptor to connect to the internet, your Eurobox Receiver will need to...

    Connection Problem

    If you see at the top of the screen Connection Problem, then disconnect your TV box and also your...

    Picture Showing no sound

    First check the volume on both the STB and your TV. If the volume is up high on both, and you...

Copyright © 2020 BuyIPTV. All Rights Reserved.