Mag and STBEmu Buffer Settings

How to Change the Buffering Settings on the MAG Set top box and STBEmu. Changing the buffering settings on your Mag box can help with buffering issues on Mag Box.

After loading the Portal, Go to Menu, Settings

Scroll down and choose Advanced Settings

Use the slider in Buffering to choose the delay, we recommend starting with 6 to 10 seconds, then select OK This will allow the device to create a longer buffer to help with any buffering issues. 



  • 0 Users Found This Useful
Was this answer helpful?
Related Articles
    No Signal - Black Screen

    Check the connection from the STB to your television whether it is a HDMI lead or AV lead....

    Not Loading/Stuck on loading

    When you start to NowWatchTVLive the STB says “Loading” – if it gets stuck it means it cannot...

    Connecting wirelessly

    If you are using a Wi-Fi adaptor to connect to the internet, your Eurobox Receiver will need to...

    Connection Problem

    If you see at the top of the screen Connection Problem, then disconnect your TV box and also your...

    Picture Showing no sound

    First check the volume on both the STB and your TV. If the volume is up high on both, and you...

Copyright © 2020 BuyIPTV. All Rights Reserved.