You need to check your video settings to do this Go to Settings Go to Video What is your video output mode set at PAL is analogue and only used if you are either connecting more than one TV to your box through the AV Lead (red yellow and white plugs) If you have a fairly new TV and are connected with a HDMI cable change this setting from PAL to 1080P-50 by pressing ok on it and scrolling down and selecting it. Scroll down to OK and press ok Reboot
- 1 Users Found This Useful
No Signal - Black Screen
Check the connection from the STB to your television whether it is a HDMI lead or AV lead....Not Loading/Stuck on loading
When you start to NowWatchTVLive the STB says “Loading” – if it gets stuck it means it cannot...Connecting wirelessly
If you are using a Wi-Fi adaptor to connect to the internet, your Eurobox Receiver will need to...Connection Problem
If you see at the top of the screen Connection Problem, then disconnect your TV box and also your...Picture Showing no sound
First check the volume on both the STB and your TV. If the volume is up high on both, and you...