When you start to NowWatchTVLive the STB says “Loading” – if it gets stuck it means it cannot connect to the Internet at all. If you’re STB is connected directly to the router with an Ethernet cable Make sure both end of the Ethernet cable are properly pushed in. There should be a light on on the router that corresponds to the port on the back that the STB is connected to. If the light is not on, there is a problem with the connection. You can try replacing the Ethernet cable or trying a different port. Otherwise you will need to contact your router supplier.
- 3 Users Found This Useful
No Signal - Black Screen
Check the connection from the STB to your television whether it is a HDMI lead or AV lead....Connecting wirelessly
If you are using a Wi-Fi adaptor to connect to the internet, your Eurobox Receiver will need to...Connection Problem
If you see at the top of the screen Connection Problem, then disconnect your TV box and also your...Picture Showing no sound
First check the volume on both the STB and your TV. If the volume is up high on both, and you...Picture Breaking Up or Pixelating
First make sure that no computer or devices are switched on as these may take up bandwidth and...